| 浏览数：16462 推荐度：☆☆☆☆☆ 投票数：18评论数：29 | |
公制美标最新第三版《Metric Fastener Standards 3rd Edition》目录
|
公制美标第三版 Metric Fastener Standards
Year Published: 1999
Edition: Third Edition
大十六开超过1,000页 
壁纸下载： 800x600 1024x768 3rd EDITION METRIC FASTENER STANDARDS Section A SCREW THREADS Section B MATERIALS, COATINGS AND FINISHES Section C BOLTS, SCREWS AND STUDS Section D NUTS Section E LOCKING FASTENERS Section F STRUCTURAL BOLTING Section G SLOTTED AND RECESSED SCREWS Section H SOCKET SCREWS Section I RIVETS Section J PINS AND WASHERS Section K TECHNICAL DATA Section L QUALITY ASSURANCE | Section A | SCREW THREADS | | | IFI | Basics of Metric Screw Threads | A-1 | | ANSI/ASME B1.7M | Extract of Definitions | A-11 | | ASME B1.13M | Metric Screw Threads - M Profile | A-20 | | ASME B1.3M | Screw Thread Gaging Systems for Dimensional Acceptability of Metric Screw Threads | A-46 | | ANSI/ASME B1.16M | Gages and Gaging for Metric M Screw Threads | A-55 | | Section B | MATERIALS, COATINGS AND FINISHES | | | IFI | Selecting Fastener Materials | B-1 | | IFI | Bolt and Nut Compatibility | B-30 | | IFI | Corrosion | B-34 | | IFI | Platings and Coatings | B-50 | | ASTM F568M | Carbon and Alloy Steel Externally Threaded Metric Fasteners | B-56 | | ASTM F563M | Carbon and Alloy Steel Metric Nuts | B-68 | | ASTM F738M | Stainless Steel Metric Bolts, Screws, and Studs | B-79 | | ASTM F836M | Stainless Steel Metric Nuts | B-91 | | ASTM F468M | Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] | B-99 | | ASTM F467M | Nonferrous Nuts for General Use | B-109 | | ASTM F788/F788M | Surface Discontinuities of Bolts, Screws, and Studs | B-115 | | ASTM F812/F812M | Surface Discontinuities of Nuts | B-123 | | ASTM F606M | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric] | B-130 | | ASTM F871M | Electrodeposited Coatings on Metric Threaded Components | B-114 | | ASTM B633 | Electrodeposited Coatings of Zinc on Iron and Steel | B-154 | | ASTM B766 | Electrodeposited Coatings of Cadmium | B-160 | | ASTM A153 | Zinc Coating (Hot-Dip) on Iron and Steel Hardware | B-171 | | ASTM B695 | Coatings of Zinc Mechanically Deposited on Iron and Steel | B-175 | | ASTM B696 | Coatings of Cadmium Mechanically Deposited on Iron and Steel | B-183 | | ASTM F1136 | Chromium/Zinc Corrosion Protective Coatings for Fastener | B-191 | | ASTM F1135 | Cadmium or Zinc Chromate Organic Corrosion Protective Coatings for Fasteners | B-194 | | ASTM F1137 | Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners | B-197 | | Section C | BOLTS ,SCREWS AND STUDS | | | ASME B18.2.3.1M | Metric Hex Cap Screws | C-1 | | ANSI B18.2.3.2M | Metric Formed Hex Screws | C-19 | | ANSI B18.2.3.3M | Metric Heavy Hex Screws | C-30 | | ASME B18.2.3.4M | Metric Hex Flange Screws | C-38 | | ANSI B18.2.3.5M | Metric Hex Bolts | C-52 | | ANSI B18.2.3.6M | Metric Heavy Hex Bolts | C-60 | | ANSI B18.2.3.8M | Metric Hex Lag Screws | C-66 | | ASME B18.2.3.9M | Metric Heavy Hex Flange Screws | C-71 | | ASME B18.2.3.10M | Square Head Bolts [Metric Series] | C-86 | | IFI-528 | Metric Studs and Bent Bolts | C-94 | | ASME B18.5.2.1M | Metric Round Head Short Square Neck Bolts | C-99 | | ANSI/ASME B18.5.2.2M | Metric Round Head Square Neck Bolts | C-107 | | IFI-544 | Metric Round Head Ribbed Neck Bolts | C-114 | | ASME B18.5.2.3M | Round Head Square Neck Bolts With Large Head [Metric Series] | C-119 | | ASME B18.2.7.1M | Metric 12-Spline Flange Screws | C-126 | | Section D | NUTS | | | IFI | Commentary on Nuts | D-1 | | ASME B18.2.4.1M | Metric Hex Nuts, Style 1 | D-3 | | ANSI B18.2.4.2M | Metric Hex Nuts, Style 2 | D-8 | | ANSI B18.2.4.3M | Metric Slotted Hex Nuts | D-13 | | ANSI B18.2.4.4M | Metric Hex Flange Nuts | D-19 | | ANSI B18.2.4.5M | Metric Hex Jam Nuts | D-24 | | ANSI B18.2.4.6M | Metric Heavy Hex Nuts | D-29 | | Section E | LOCKING FASTENERS | | | IFI | Introduction to Locking Fasteners | E-1 | | IFI-524 | Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws | E-7 | | IFI-525 | Test Procedure for the Performance of Metric Chemical Coated Prevailing-Torque Screws | E-12 | | ASME B18.16.3M | Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | E-15 | | ANSI B18.16.1M | Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | E-21 | | ANSI B18.16.2M | Torque-Tension Test Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | E-30 | | IFI-543 | Test for Evaluating the Torque-Tension Relationship on Both External and Internal Metric Threaded Fastener | E-31 | | Section F | STRUCTURAL BOLTING | | | IFI | Commentary on High-Strength Structural Bolting | F-1 | | ANSI B18.2.3.7M | Metric Heavy Hex Structural Bolts | F-9 | | ASTM A325M | High-Strength Bolts for Structural Steel Joints [Metric] | F-16 | | ASTM A490M | High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] | F-21 | | ASTM F959M | Compressible- Washer-Type Direct Tension Indicators for Use With Structural Fasteners[Metric] | F-25 | | Section G | SLOTTED AND RECESSED SCREWS | | | IFI | An Introduction to Small Screws | G-1 | | ASME B18.6.7M | Metric Machine Screws | G-12 | | ASME B18.6.5M | Metric Thread Forming and Thread Cutting Tapping Screws | G-37 | | SAE J1237 | Metric Thread Rolling Screws | G-80 | | IFI | Recommended Technique for Measuring Case Depth | G-90 | | IFI-504 | Metric Self-Drilling Tapping Screws | G-92 | | ASME B18.13.1M | Screws and Washer Assemblies - SEMS [Metric Series] | G-102 | | Section H | SOCKET SCREWS | | | ASME/ANSI B18.3.1M | Metric Socket Head Cap Screws | H-1 | | ASME/ANSI B18.3.3M | Metric Hexagon Socket Head Shoulder Screws | H-18 | | ASME/ANSI B18.3.4M | Metric Hexagon Socket Button Head Cap Screws | H-28 | | ASME/ANSI B18.3.5M | Metric Hexagon Socket Flat Countersunk Head Cap Screws | H-35 | | ASME/ANSI B18.3.6M | Metric Hexagon Set Screws | H-45 | | ASME/ANSI B18.3.2M | Metric Hexagon keys and Bits | H-55 | | ASTM A574M | Alloy Steel Socket Head Cap Screws [Metric] | H-60 | | ASTM A912M | Alloy Steel Socket Set Screws [Metric] | H-67 | | ASTM A880M | Stainless Steel Socket Set Screws [Metric] | H-73 | | ASTM A879M | Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] | H-78 | | ASTM A835M | Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] | H-84 | | ASTM A837M | Stainless Steel Socket Head Cap Screws [Metric] | H-91 | | Section I | BLIND RIVETS AND SMALL SOLID RIVETS | | | IFI | An Introduction to Rivets | I-1 | | IFI-110/550 | Glossary of Terms Related to Blind Rivets | I-3 | | IFI-505 | Metric Break Mandrel Blind Rivets | I-8 | | IFI-509 | Metric Break Mandrel Closed End Blind Rivets | I-15 | | IFI-520 | Metric Pull Through Mandrel Blind Rivets | I-21 | | IFI-522 | Mechanical Testing of Metric Blind Rivets | I-27 | | IFI-530 | Metric Structural Splitting Self-Plugging Pull Mandrel Blind Rivets | I-32 | | IFI-551 | Metric Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets | I-38 | | IFI-552 | Metric Multi-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets | I-46 | | IFI-553 | Metric Drive Pin Blind Rivets | I-51 | | ANSI/ASME B18.1.3M | Metric Small Solid Rivets | I-57 | | ANSI/ASME B18.7.1M | Metric General Purpose Semi-Tubular Rivets | I-68 | | Section J | PINS AND WASHERS | | | IFI | An Introduction to Pins and Washers | J-1 | | ASME B18.8.3M | Metric Spring Pins, Coiled | J-2 | | ASME B18.8.4M | Metric Spring Pins, Slotted | J-8 | | ASME B18.8.5M | Metric Machine Dowel Pins - Hardened Ground | J-16 | | ASME B18.8.6M | Metric Cotter Pins | J-22 | | ASME B18.8.7M | Metric Headless Clevis Pins | J-26 | | ASME B18.8.8M | Metric Headed Clevis Pins | J-32 | | ANSI B18.22M | Metric Plain Washers | J-38 | | ASTM F436M | Metric Hardened Steel Washers | J-42 | | IFI-534 | Metric Beveled Washers | J-48 | | ASME B18.21.2M | Metric Lock Washers | J-49 | | Section K | TECHNICAL DATA | | | IFI | Rules for the Use of SI Units Applicable to Metric Mechanical Fasteners | K-1 | | IFI | What is a Screw? What is a Bolt? | K-5 | | IFI-527 | Clearance Holes for Metric Threaded Fasteners | K-7 | | ASME B18.6.5M | Tapping Screw Approximate Hole Sizes | K-9 | | IFI | IFI Engineering Committee Recommended Hole Sizes - Metric Types D,F,G,T Tapping Screws | K-16 | | IFI | ISO System of Limits and Fits | K-18 | | SAE J121M | Decarburization in Hardened and Tempered Metric Threaded Fasteners | K-22 | | IFI-142 | Hydrogen Embrittlement Risk Management | K-26 | | IFI | Weights of Metric Fasteners | K-32 | | IFI | Fastener Terminology | K-37 | | IFI | Standards and Specifications | K-41 | | IFI | In-Process Sampling Frequency | K-52 | | Section L | QUALITY ASSURANCE | | | IFI | Introductory Notes | L-1 | | ASME/ANSI B18.18.1M | Inspection and Quality Assurance for General Purpose Fasteners | L-5 | | ASME/ANSI B18.18.2M | Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners | L-10 | | ASME/ANSI B18.18.3M | Inspection and Quality Assurance for Special Purpose Fasteners | L-18 | | ASME/ANSI B18.18.4M | Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications | L-31 | | ASME B18.18.5M | Inspection and Quality Assurance Plan Requiring In-Process Inspection and Controls | L-39 | | ASME B18.18.6M | Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System | L-50 | | ASME B18.18.7M | Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan | L-53 | | ASME FAP-1 | Quality Assurance Program Requirements for Fastener Manufactures,Distributors,and Testing Laboratories | L-55 | | ASTM F1470 | Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection | L-82 | | | | | 2004-12-6 16:03:00 |
|
|
黄页
黄页
黄页
黄页
非标黄页
咨询系统
RSS
